Contract was signed to strip and re-roof Apartment building in Warwick RI.original roof has 3 layers of roofing material including tar and gravel and 2 layers of hot Tar rolled roofing. Building was 4 story high and busy parkinglot directly behind the 3 sides of the bulding. We had to use 4th side for access and dumpster. Roof has been cut on section for easier separation, so we can do a section at a time. This way if rain started we can easiely watertight it. Along the way we had to replace some plywood that were rotted.Once we clear up the area, we install 2 inch ISO insulation over the plywood using manufacture recomended fastering method. Every 1 inch of ISO insulation adds 6-R to the building roof insulation. After “Mule Hyde” 60mil EPDM rubber has been applied using fully asdhered mhetod.

Project Type EPDM Flat roof replacement
Location Warwick RI
Completion Date May 2016
Project Size 4000 sq.ft.
Project cost $30,000
  • Full strip and dispose
  • Repair plywood
  • Replace 3-inch drains
  • Flash the chimney with lead
  • 2-inch ISO installation
  • Supply dumpster
  • 30-year Warranty
© 2021 Mr.Roof.Inc 829 Newport ave. Attleboro MA 02703 I Design and development INK