Cost calculator

Strip current roof and install new “GAF ” “Certainteed ” roofing system with lifetime warranty.

• - Protect the house with tarps and plywood if needed to avoid any damage by the falling debris.

• - Strip all roofing materials and dispose to dumpster or company trailer.

• - Inspect wood for any water or any other damage, repair as needed.

• - Provide up to 32f of ledger wood replacement or 1 plywood free of charge. Any wood above that amount should be priced at 90$ per plywood or 8$ per linear foot for wood.

• - Install pre-painted aluminum drip edge along the entire roof perimeter.

• - Install 6f of Ice@Water shield on the bottom of the roof and 18 inches at the rakes.

• - Cover the remaining of the roof deck area with synthetic underlayment.

• - Install starter strip under the first shingle course.

• - Install chosen shingle by manufacturer recommendation and requirements.

• - Use galvanized, corrosion -resistance roofing nails.

• - Replace all pipe boot flashings.

• - Remove existing chimney flashing, cut in ¾ inch in to the brick and install new chimney flashing, seal brick cuts with cement-based silicone.

• - Replace existing or Cut-In and install new ridge vent.

• - Replace existing gutters with new ones, color to choose.

• - Replace existing skylight. Reflash existing skylight.

• - Complete clean-up and removal of all debris, including use of a magnetic roller to pick up nails.

• - Provide 10 year Mr.Roof.Inc warranty and Standard pro-rated manufacture warranty 50 year non-prorated manufacture warranty 50 year non/prorated material and 25 workmanship warranty that includes material, labor and removal.